Durable matte synthetic label material with an extremely strong high tack adhesive for GHS labels, chemical labels and industrial applications
DIA704H is a high quality matte PP inkjet label material for GHS labels, chemical labels and other applications where very strong and reliable adhesion is required. It combines a durable matte synthetic face material with an extremely strong high tack adhesive, making it particularly suitable for demanding industrial environments. The matte BOPP face stock is specially coated for printing with water based inkjet inks, providing sharp text, clearly readable barcodes and high quality full colour printing. This makes DIA704H an excellent choice for printing GHS labels and chemical labels in house, for example with Epson ColorWorks colour label printers. The reverse side of the BOPP film is also specially coated to improve the bond between the face material and the adhesive. One of the key characteristics of DIA704H is its powerful synthetic rubber based hot melt adhesive . The adhesive combines high initial tack with strong permanent adhesion, helping the label remain securely attached to surfaces and packaging where a standard permanent adhesive may not provide sufficient performance. Peel adhesion is specified at 18 ± 3 N/25 mm, while loop tack is 28 ± 3 N/25 mm. The combination of a durable PP face stock and extremely strong adhesive makes DIA704H particularly suitable for GHS labels, chemical packaging, industrial labels, drums, containers and other applications where long lasting adhesion is important . Its use is not limited to the chemical industry. DIA704H is also an excellent choice for general industrial applications where a durable synthetic label with particularly strong adhesion is required. DIA704H can be applied from +4 °C and has a service temperature range from −20 to +70 °C. The material specification also states compliance with BS5609 Section 3 .
