No products in the cart.
The LD-100-RS is the basic model of Labelmate label dispensers. With this label dispenser labels with a length between 6 and 150 mm are indicated. As soon as the label has been removed, the next one is automatically handed out, the backing paper is then neatly rolled up. This Labelmate dispenser can work with core diameters from 40 to 76 mm, in addition, many options and additions are available on request, such as a label counter.
You can easily order Labelmate equipment via Businesslabels, you can always contact us if you have any questions.
€475,00
Excl. TAX
The LD-100-RS is the basic model of Labelmate label dispensers. With this label dispenser labels with a length between 6 and 150 mm are indicated. As soon as the label has been removed, the next one is automatically handed out, the backing paper is then neatly rolled up. This Labelmate dispenser can work with core diameters from 40 to 76 mm, in addition, many options and additions are available on request, such as a label counter.
You can easily order Labelmate equipment via Businesslabels, you can always contact us if you have any questions.
This LD-100-RS is a very universally usable label dispenser from the Labelmate brand. This label dispenser is suitable for “standard” labels, or rectangular labels. The maximum width of the labels is 115 mm for this model, for wider labels the Labelmate LD-200-RS is available. The length of the labels may vary between 6 and 150 mm.
Whether you process a lot of labels in a production environment or in a warehouse, with a label dispenser you speed up the processing of the labels. The manual removal of labels from the roll 1 by 1 for placing takes a lot of labor time. With a label dispenser such as this Labelmate LD-200-RS, you can process the labels up to 5x faster.
You can set up a label dispenser within 30 seconds and then place labels easily and very efficiently. The label dispenser neatly displays the already printed labels and waits until the label has “taken off” and then neatly indicates the next one. This is also referred to as the “peel & present” principle.
The liner is rolled up neatly with this label dispenser, so the workplace remains tidy.
Maximum width: 115 mm
Label length: Minimum 6 mm – Maximum 150 mm
Maximum roll diameter: 220 mm (max 6 kg)
Core diameter: Minimum 40 mm – Maximum 76 mm
Labelmate has a very wide range of label dispensers. For example, the LD label dispenser series from Labelmate consists of a number of different versions all based ont this standard model. You will also find the following variants on Business labels:
Transparant labels
To work with difficult labels such a transparant materials a special sensor is needed. The “U” series of Labelmate is designed equipped with this sensor Labelmate LD-100-U
Broader labels
For labels wider than 115mm, but narrower than 165mm, a wider version is available. This model is offered as the Labelmate LD-200-RS
Stainless steel version
A stainless steel version is available for damp workplaces and food-producing companies. This model is offered as the Labelmate LD-100-SS.
Other models and versions
A stainless steel and / or a wider version of the LD-100-U is also available on request. Please contact our sales department for this model.
The Labelmate label dispensers are offered in their standard form by Businesslabels in the webshop. However, many additional options and variants are available. These are supplied on request, feel free to contact if you want to use 1 or more of the options below. Most of these options are based on “factory installed” which means that they cannot be added later. These options can therefore only be added to the label dispenser at the time of order.
A well-functioning solution is important, just as important is the reliability of the solution. With Labelmate we know for sure that we are in the right place. Labelmate creates an overcapacity with the used parts. As a result, wear is minimal and the machine never has to go to extremes to function properly.
Labelmate is of such quality that a 3 year warranty* is given on the equipment such as label dispensers.
*The power supply is limited to 1 year.
Labelmate is a producer in Belgium of equipment for processing labels. This includes rewinder, unwinders, label dispensers and label counters. Labelmate distinguishes itself by the high quality of its equipment and is always flexible with special requests. Labelmate is therefore seen by Businesslabels as an ideal collaboration partner for label equipment.
Epson recycle programma